Safer management of process changes in chemical reactors

Nowadays many chemical industries are SMEs where multi-purpose batch or semi-batch reactors are commonly used. Vent sizing for realistic runaway scenario is not an easy task for such enterprises since they have usually few resources and use multi-purpose reactors with fast process turnovers. As a consequence these batch and semi-batch reactors are usually equipped with emergency relief systems sized once forever when the reactor is designed. This can lead to a large underestimation of the vent area in case of runaway reactions occurring when processes different from the ones considered for originally sizing the vent are carried out.The approach proposed in this work aims to identify the maximum reactor load leading to safe conditions even in case of runaway phenomena to be handled with the emergency relief system already installed (or even with a smaller vent area). This approach allows avoiding the change of the emergency relief system with a larger vent area (as required every time a new more hazardous process has to be carried out on existing reactors) at the price of lower plant productivity.     

A preliminary investigation into the physical and chemical properties of biomass ashes used as aggregate fillers for bituminous mixtures

Fly and bottom ashes are the main by-products arising from the combustion of solid biomass. Since the production of energy from this source is increasing, the processing and disposal of the resulting ashes has become an environmental and economic issue. Such ashes are of interest as a construction material because they are composed of very fine particles similar to fillers normally employed in bituminous and cementitious mixtures. This research investigates the potential use of ash from biomass as filler in bituminous mixtures. The morphological, physical and chemical characteristics of 21 different ashes and two traditional fillers (calcium carbonate and “recovered” plant filler) were evaluated and discussed. Leaching tests, performed in order to quantify the release of pollutants, revealed that five ashes do not comply with the Italian environmental re-use limits. Experimental results show a wide range of values for almost all the investigated properties and a low correlation with biomass type in terms of origin and chemical composition. Furthermore, sieving and milling processes were found to improve the properties of the raw material in terms of grading and sample porosity. The effectiveness of these treatments and the low content of organic matter and harmful fines suggest that most of the biomass ashes investigated may be regarded as potential replacements for natural filler in bituminous mixtures.     

Human impacts on fire occurrence: a case study of hundred years of forest fires in a dry alpine valley in Switzerland

Forest fire regimes are sensitive to alterations of climate, fuel load, and ignition sources. We investigated the impact of human activities and climate on fire occurrence in a dry continental valley of the Swiss Alps (Valais) by relating fire occurrence to population and road density, biomass removal by livestock grazing and wood harvest, temperature and precipitation in two distinct periods (1904–1955 and 1956–2006) using generalized additive modeling. This study provides evidence for the role played by humans and temperature in shaping fire occurrence. The existence of ignition sources promotes fire occurrence to a certain extent only; for example, high road density tends to be related to fewer fires. Changes in forest uses within the study region seem to be particularly important. Fire occurrence appears to have been negatively associated with livestock pasturing in the forest and wood harvesting, in particular during the period 1904–1955. This study illustrates consistently how fire occurrence has been influenced by land use and socioeconomic conditions. It also suggests that there is no straightforward linear relationship between human factors and fire occurrence.     

Kinetic behavior of anti-inflammatory drug ibuprofen in aqueous medium during its degradation by electrochemical advanced oxidation

The electrochemical abatement of the drug ibuprofen (2-(4-isobutylphenyl)propionic acid) from aqueous solution has been carried out by anodic oxidation. The electrolyses have been performed at constant current using a small, undivided cell equipped with a Pt or thin-film boron-doped diamond (BDD) anode and a carbon-felt cathode. The results have shown that ibuprofen has been destroyed under all the conditions tested, following pseudo-first-order kinetics; however, BDD enables higher removal rates than Pt, because the former produces greater quantity of ^?OH. Using BDD anode, the pseudo-first-order rate constant increased with applied current and when NaCl replaced Na₂SO₄ as supporting electrolyte, while it is almost unaffected by ibuprofen concentration. Mineralization of ibuprofen aqueous solutions was followed by total organic carbon (TOC) measurements. After 8 h of electrolysis, TOC removal varied from 91 % to 96 % applying a current in the range of 50–500 mA. The reaction by-products were quantified by chromatographic techniques, and in particular, aliphatic acids (oxalic, glyoxylic, formic, acetic, and pyruvic) have been the main intermediates formed during the electrolyses. The absolute rate constant for the oxidative degradation of ibuprofen have also been determined, by competition kinetic method, as 6.41?×?10⁹ M^?1?s^?1.     

台风灾害气象指数保险相关技术方法初探

气象指数灾害保险是目前全球范围内广泛研究的一种风险转移工具,它可以克服传统的自然灾害保险的局限性,在农业保险领域应用前景广阔。以福建省连江县为例,依据连江县台风灾害及台风活动特征,将能够对连江县造成一定损失的台风分成分别以大风、大雨和大风雨为主导的3类。结合连江站相关气象数据及概率分布建立了广义的台风灾害气象指数,最后构建了保险赔付路线图,以供有关部门参考。     

Avian Conservation under the Endangered Species Act: Expenditures versus Recovery Priorities

Abstract: Budget constraints require the U.S. Fish and Wildlife Service to prioritize species for recovery spending. Each listed species is ranked according to the degree of threat it faces, its recovery potential, and its taxonomic distinctness. We analyzed state and federal government expenditures for recovery of threatened and endangered birds ( n = 85 species) from 1992 to 1995 to determine if the priority system was being followed. Although recovery spending correlated with priority rank, priority rank explained <5% of the variation in spending. A small number of the same moderately ranked species dominated expenditures each year (41–79% of total annual budgets). Species with wide distributions, high recovery potential, and captive breeding programs received the most funding, and more funding than their priority ranks dictated. Island species received significantly less funding than expected based on priority rank. Twelve species, 10 of which resided on islands, received <$5000 at least once from 1992 to 1995. Recovery spending was unrelated to degree of threat, taxonomic distinctness, and migratory status. There also was no relationship between land-purchase expenditures and priority ranks. To improve the relationship between recovery spending on threatened and endangered birds and their priority rank, significant changes need to be made within the private sector ( less litigation and special-interest lobbying  ), U.S. Congress (increased budget and reduced earmarking  ), and the U.S. Fish and Wildlife Service (restructuring of regional offices and increased accountability).     

Convergence or divergence in desertification risk? Scale-based assessment and policy implications in a Mediterranean country

This paper explores changes (1990–2000) in two environmental indexes with the aim of providing empirical evidence on regional and local convergence in an increasing-impact phenomenon such as Land Degradation (LD) in Italy. Convergence analysis for ESAI (Environmental Sensitive Area Index) and LVI (Land Vulnerability Index) was developed at five different geographical scales. Results indicate that territorial disparities in land vulnerability tend to increase during the investigated period following a defined spatial pattern that depends on land quality, the environmental context and the economic performance of regional systems. Finally, the implications this process has on policy strategies aimed at mitigating desertification risk are discussed.     

Electrochemical remediation of copper (II) from an industrial effluent Part II: three-dimensional foam electrodes

A batch recycle removal of copper ions from an industrial effluent by means of copper foam cathodes was tested. A constant current of 750 A was applied to the cell in order to perform the reduction. Copper depletion was investigated at different solution flow rates and a removal greater than 98% was obtained with a flow rate of 1000 l/h. The influence of initial metal concentration on copper deposition and current efficiency is also discussed.